12-11-2013 08:08 PM
I have a client where I would like to rate limit egress traffic from an internal source IP. This source IP tends to be a major bandwidth hog. I currently have no QOS profiles setup but I do see the option to limit egress I believe.
Are QOS profiles the easiest / only way to do this? Does QOS allow you to limit based on a single IP?
12-12-2013 02:15 AM
Mackwage,
You can. Add a QoS policy on the policy tab and use the source address as a matching criteria:
This will allow you to set the class on this traffic and apply the egress limits you want via the QoS profile you have defined.
12-12-2013 02:15 AM
Mackwage,
You can. Add a QoS policy on the policy tab and use the source address as a matching criteria:
This will allow you to set the class on this traffic and apply the egress limits you want via the QoS profile you have defined.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
