Rate limiting egress on perimeter install

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Rate limiting egress on perimeter install

L4 Transporter

I have a client where I would like to rate limit egress traffic from an internal source IP. This source IP tends to be a major bandwidth hog. I currently have no QOS profiles setup but I do see the option to limit egress I believe.

Are QOS profiles the easiest / only way to do this? Does QOS allow you to limit based on a single IP?

1 accepted solution

Accepted Solutions

L4 Transporter

Mackwage,

     You can. Add a QoS policy on the policy tab and use the source address as a matching criteria:

This will allow you to set the class on this traffic and apply the egress limits you want via the QoS profile you have defined.

View solution in original post

1 REPLY 1

L4 Transporter

Mackwage,

     You can. Add a QoS policy on the policy tab and use the source address as a matching criteria:

This will allow you to set the class on this traffic and apply the egress limits you want via the QoS profile you have defined.

  • 1 accepted solution
  • 1643 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!