Reached max allowble probes

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Reached max allowble probes

L1 Bithead

Users have no access.

 

[Debug  988]: Reached max allowble probes, adding IP 10.100.xxx.xxx to queue for later processing.  Probing 40 IPs, list contains 117 entries
Reached max allowble probes, adding IP 10.100.xxx.xxx to queue for later processing.  Probing 40 IPs, list contains 117 entries
Probing IP 10.100.xxx.xxx failed. For initial probing, try again after 3 min
[ Info  938]: IP 10.100.xxx.xxx is already in the probing queue

[Debug  484]: IP 10.100.xxx.xxx for acme\user cannot be probed.  List is full of 201 entries, currently probing 40

 

+0500 Error: pan_user_id_agent_proc_ipuser(pan_user_id_uia.c:444): pan_user_id_agent_send_ip_user_to_dp() failed for user acme\user

+0500 Error: pan_user_id_uia_handle_ip_msg_i(pan_user_id_uia_v5.c:141): pan_user_id_agent_proc_ipuser(vsys 1, ip 10.100.xxx.xxx, user acme\user, timestamp 1466142528) failed

 

What we can do?

2 accepted solutions

Accepted Solutions

 

The problem because of NetBIOS probes have queue

When we disable NetBIOS probes all users have no access after relogon.

 

Than we enable WMI probes the problem of User-ID disapear

for correct user rights for WMI probes we use:   wmic /node:(IP address) computersystem
get username

 

The installation is about 1500 users and 2 User agents.

View solution in original post

First of all the user to IP mapping should be refreshed at user logon. Please make sure that every logon is generating security events on the LDAP servers and the the agent is able to map them, 

https://live.paloaltonetworks.com/t5/Management-Articles/Security-Event-IDs-from-Active-Directory-Us...

 

Seems that almost all of your user to ip mapping relies on windows probes which is not ideal, As an alternative method you could enable kerberos SSO in captive portal.

https://www.paloaltonetworks.com/documentation/70/pan-os/pan-os/authentication/configure-kerberos-si...

 

regards,

Gerardo.

View solution in original post

4 REPLIES 4

Community Team Member

 

Having debug on in a scaled deployment can sometimes cause problems.  You could try disabling or lower the debug level to alleviate the problem.

 

Alternatively you could disable probing :

Getting-Started-User-ID

 

Splitting the load over multiple agents is also a good idea in a scaled deployment.

 

 

LIVEcommunity team member, CISSP
Cheers,
Kiwi
Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.

 

The problem because of NetBIOS probes have queue

When we disable NetBIOS probes all users have no access after relogon.

 

Than we enable WMI probes the problem of User-ID disapear

for correct user rights for WMI probes we use:   wmic /node:(IP address) computersystem
get username

 

The installation is about 1500 users and 2 User agents.

First of all the user to IP mapping should be refreshed at user logon. Please make sure that every logon is generating security events on the LDAP servers and the the agent is able to map them, 

https://live.paloaltonetworks.com/t5/Management-Articles/Security-Event-IDs-from-Active-Directory-Us...

 

Seems that almost all of your user to ip mapping relies on windows probes which is not ideal, As an alternative method you could enable kerberos SSO in captive portal.

https://www.paloaltonetworks.com/documentation/70/pan-os/pan-os/authentication/configure-kerberos-si...

 

regards,

Gerardo.

Probing is more of an active user mapping to verify a user is still linked to a certain IP address. The LDAP server creates user-to-ip mappings where WMI probing actively verifies a user is still valid. The probing variable can be changed from the default setting to a longer duration so that clients are not probed as often or possibly disable probing altogether. When changing the duration, you may set the timer to half the value of your DHCP renewal timer

 

By Palo Alto technical support

 

Regards!

 

 

  • 2 accepted solutions
  • 7649 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!