04-12-2021 03:20 AM
Hi Team,
Is it possible to whitelist on the basis of destination for scanning port. I can see in Reconnaissance configuration we can only whitelist on the basis on source address. But more than 500 sources are available to scan port so its difficult to allow those for specific destination address.
Please suggest.
regards,
Shiv
04-15-2021 05:29 AM
Hi @RamBalaji ,
You are correct. The reconnaissance method will only allow to configure source addresses.
That being said, if your sources are coming from the same network or is a range of addresses you can easily configure that as an address group, which in turn becomes a selection in your reconnaissance configuration.
Hope this helps,
-Kiwi
04-15-2021 03:42 PM
This currently is not possible. You can reach out to your SE to see if an existing feature request exists for this feature.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
