I can't seem to find the control for resetting the PA-200 to the original out of the box config. Any assitance is appreciated.
Solved! Go to Solution.
In order to reset to factory defaults, you'll need to console directly to the PAN device through its console port.
Then, you'll need to reboot the machine. During boot, hit the letter "m". Then if asked, type "maint".
This should enter you into maintenance mode, and from there you can reset to factory defaults.
Let us know if you have any issues.
Thank you, do you have something already made up for stepping me through a layer 3 install. The quick start is OK, but something more descript would be better.
Here is a video that goes through a basic L3 deployment.
Otherwise, the Administrators guide is also a good resource.
If you could please mark the discussion as answered that would be helpful for us.
Also, if you run into any trouble, feel free to open a case or another discussion post.
Thanks and goodluck with your deployment,
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!