01-13-2023 02:37 AM
I am trying to add new interface to the ospf and pushing the configuration from Panorama to firewall, But I am getting the below error while commiting "client routed phase 2 failure", Commit on secondary firewall is succeeding. Issue is only on Primary firewall.
When I checked the logs in Palo-Alto firewall, I can see the below:
routed-config-p2-failed : 'Route daemon configuration load phase-2 failed.
Tried doing the below KEDB, but no help. Can anybody suggest on this.
01-16-2023 07:31 AM
Hi @Sujanya ,
OSPF config is part of network configuration, managed with Panorama template. By default if there is local configuration overlapping with config pushed with Panorama template, FW will prefer the local config.
Can you confirm that your virtual-router config on the firewall is the config pushed from Panorama and not overridden? Connect to the problematic FW got to Network -> Virtual-Router and check if you see the green gear next to the VR for which you are trying to push the OSPF update
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!