09-17-2024 05:58 PM
I am trying to setup SDWAN, however this firewall currently has several Site to Site VPNS which causes an error on deploying site to site vpns. I am trying to setup a second WAN address to be usedonly for SD WAN. Currently my public ip is 2.2.2.2/24 on ethernet1/2. I converted it to a trunk vlan 2 (2.2.2.0/24) as the native vlan and the tagged vlan. On the firewall I now have untagged 2.2.2.2/24 and tagged 2.2.2.3/24 on different virtual routers. 2.2.2.2 is in VR1 and 2.2.2.3 is in VR2. 2.2.2.2 is fine, however even though my internet router (2.2.2.1) is getting an arp for 2.2.2.3, I am not getting an arp for 2.2.2.1 on my subinterface for 2.2.2.3. Any idea how to get 2.2.2.3 working?
10-19-2024 10:50 PM
Hi @mmercald
Can you confirm your configuration on router interface side? I am suspecting some VLAN configuration to be flowed / allowed on router side.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
