Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
03-31-2016 08:50 AM
Hi All,
I am checking traffic logs under Monitor tab.
In order to troubleshoot issue and understand behavior of a specific traffic flow, I think "Session End Reason" column is really needed.
That's why I am writing on community.
We have two PA firewall:
- PA-200
- PA-500
On PA-500 I can clearly see column mentioned, while on PA-200 is NOT available.
Can anyone confirm that on PA-200 "Session End Reason" column is not available?
BR
Luca
04-01-2016 06:38 AM
Hi Luca,
the column is available from PANOS 6.1.
You can find it on Release Note of PANOS 6.1 at page 12.
Jacopo.
03-31-2016 02:22 PM - edited 03-31-2016 02:22 PM
Hi...Maybe the PA200 does not have the session-end colummn enabled.
04-01-2016 03:28 AM
Hi Luca
I have PA200 witn 6.1.10 PANOS and I have such column.
Probably You need to enable this colum
Regards
SLawek
04-01-2016 06:38 AM
Hi Luca,
the column is available from PANOS 6.1.
You can find it on Release Note of PANOS 6.1 at page 12.
Jacopo.
04-01-2016 06:49 AM
Hi @_slv_, @rmonvon, @Jacopo_Vigano
Thank you all guys for your quick response.
I supposed wrong that the NOT available column was related with PA200 model while is related to PAN-OS version.
Thanks again
BR
Luca
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
