show routing resource

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

show routing resource

L4 Transporter

When using  show routing resource command. Why is there a overlimit value when we are under the 2500 limit count

 

 

LOBAL ROUTING RESOURCE USAGE:
==========
All Routes (total): 1088 (limit 2500)
All IPv4 Routes (total): 1088 (limit 2500) (overlimit counts 393372562)
All IPv6 Routes (total):

1 accepted solution

Accepted Solutions

L7 Applicator

I have not worked with this particular counter and cannot find documentation on it.  But based on how counters work in general on the PA I see two possibilities.

 

Your route table grows beyond the limit periodically and is incrementing the counter and falling back to your normal level.

 

This is some kind of bug that is incrementing the counter falsely.

 

I would check this periodically and see if it is still incrementing and when during the day that happens as a start.

Steve Puluka BSEET - IP Architect - DQE Communications (Metro Ethernet/ISP)
ACE PanOS 6; ACE PanOS 7; ASE 3.0; PSE 7.0 Foundations & Associate in Platform; Cyber Security; Data Center

View solution in original post

3 REPLIES 3

L7 Applicator

I have not worked with this particular counter and cannot find documentation on it.  But based on how counters work in general on the PA I see two possibilities.

 

Your route table grows beyond the limit periodically and is incrementing the counter and falling back to your normal level.

 

This is some kind of bug that is incrementing the counter falsely.

 

I would check this periodically and see if it is still incrementing and when during the day that happens as a start.

Steve Puluka BSEET - IP Architect - DQE Communications (Metro Ethernet/ISP)
ACE PanOS 6; ACE PanOS 7; ASE 3.0; PSE 7.0 Foundations & Associate in Platform; Cyber Security; Data Center

Thank you Steve. I agree with both as I could not find any documentation either. The counter hasn't increments at all been same since we summarizated routes to get us below box limit so I wil watch it to see it ever changes and may reboot too see if it clears and advise forum

You could also see if this is covered by

 

clear counter all

 

So you don't have to reboot.

Steve Puluka BSEET - IP Architect - DQE Communications (Metro Ethernet/ISP)
ACE PanOS 6; ACE PanOS 7; ASE 3.0; PSE 7.0 Foundations & Associate in Platform; Cyber Security; Data Center
  • 1 accepted solution
  • 2648 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!