Hi GUys ,
I`m deploying a PAN.
Everything is OK , COnfiguration , URL Alerts , AV , AS everything on ALERT MODE.
But my problem , after COnfigure a L3 INterface to receive IP via dhcp client from my ISP router , my connection with internet becomes very slow!
I think the problem is on the PAN because when i rollback to my PF SENSE everything works good !
So I distrust that PAN have some trouble that i cant discover yet!
SOmebody have the same problem ?
It may be the case your link to the ISP is not negotiating the correct link status(100/Full).
To check the link status of a interface:
> show interface ethernet1/1
Name: ethernet1/1, ID: 16
Runtime link speed/duplex/state: 100/full/up
Configured link speed/duplex/state: auto/auto/auto
If everything checks out, then a good next step would be to check if traffic inspection is causing the slowdown. To test you can temporarily remove the security profiles from the security rules and see if this relieves the slowness.
As always, you can open a case with your support team for more in-depth troubleshooting.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!