SNMP monitoring on PA3250 PSU

Showing results for 
Search instead for 
Did you mean: 

SNMP monitoring on PA3250 PSU

L0 Member



Is there any way to monitor PA3250 power supply status via SNMP? 

We need to know in case there is power failure or outage in our environment.


In the gui, we never see any alarms regarding on the power loss event. 

However it is only appear in system log.




Cyber Elite
Cyber Elite


You have two possible ways:

- FW to send SNMP traps to NMS: You need to configure SNMP Trap profile (Device -> Server Profile -> SNMP Trap) and use this profile under the Log Settings (Device -> Log Settings -> System Logs -> create new using filter " ( subtype eq hw)"). To simplify it, you tell the FW to "forward system log" via SNMP trap. Note that the filter will match any harware related system logs to be sent as trap - not only PSU.


- SNMP poll from NMS: You can configure your NMS system to poll the status of the PSU you can use online/offline MIB browsers to find the correct OID: 

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!