02-11-2014 06:18 AM
is clearing the session from Session browser terminate the session which is open , as it still show up and the bytes are still increasing
02-11-2014 07:38 AM
Yes, It should terminate the active session on the PAN firewall.
As per the DOC How to Clear Sessions from the Session Monitor , clearing a session from session browser is as good as clearing it from CLI ( > clear session ID xyz).
The session you have cleared from session browser, could you please verify the same from CLI also.
> show session ID xyz
02-11-2014 06:32 PM
Are you sure it is the same session ID?
Perhaps the client is just immediately creating a new session because the traffic still continues after the session is killed.
02-11-2014 09:16 PM
I have just test it in the lab. It seems like if you clear the session on 6.0.0 from the GUI/CLI it is not clearing the session. Instead the session still stays in the session table. It seems to be a bug in 6.0.0. I would recommend to open a case with Technical support so it can be filed as a bug and issue can be fixed in upcoming releases.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!