- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
01-25-2024 04:10 AM - edited 01-25-2024 04:25 AM
While aging the firewall for delivery to a customer, the following message occurred and the firewall rebooted.
<The system is shutting down due to System Reboot initiated to start ztp again.> 。
There are no configuration settings.
I simply left the firewall on to check the health of the machine.
Does anyone know why this message is occurring?
PA-5410 / PAN-OS 10.2.3
01-29-2024 02:48 AM
Hi @sanghyeonLee ,
Some firewalls boot into ZTP mode by default. However you can exit the ZTP mode:
Hope this helps,
-Kim.
01-29-2024 11:10 PM - edited 01-29-2024 11:11 PM
Yes, it booted into ZTP mode and I knew how to turn it off.
I only powered it on to check the basic status of the machine before delivering it to the customer.
I was wondering if it is normal for a firewall that boots in ZTP mode to reboot if left on without ZTP disable.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!