09-05-2012 11:42 AM
Hi all,
I have a setup with two ISP's where one is active and the other is redundant sitting in a VR. The routing and failover works fine but only if my actual link goes down on my main ISP which will pull the static route. Is there a way to do a track IP type command in order to check for upstream failures of the ISP.
Thanks!
09-05-2012 12:59 PM
You might want to refer the following DOC:-
https://live.paloaltonetworks.com/docs/DOC-1357 wherein you configure a PBF for one ISP wherein you can have the tracking mechanism and a static route for the other.
Thank you.
09-05-2012 12:14 PM
Hello,
Do you have static routes for both the ISP's or do you have a PBF configured for one of them.
Thank you.
Subijith Raghunandan.
09-05-2012 12:17 PM
They are simple static routes. One has a higher metric pointing to the other VR.
09-05-2012 12:59 PM
You might want to refer the following DOC:-
https://live.paloaltonetworks.com/docs/DOC-1357 wherein you configure a PBF for one ISP wherein you can have the tracking mechanism and a static route for the other.
Thank you.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
