Track IP

Reply
Highlighted
L1 Bithead

Track IP

Hi all,

I have a setup with two ISP's where one is active and the other is redundant sitting in a VR.  The routing and failover works fine but only if my actual link goes down on my main ISP which will pull the static route.  Is there a way to do a track IP type command in order to check for upstream failures of the ISP.

Thanks!

Tags (2)

Accepted Solutions
Highlighted
L5 Sessionator

You might want to refer the following DOC:-

https://live.paloaltonetworks.com/docs/DOC-1357 wherein you configure a PBF for one ISP wherein you can have the tracking mechanism and a static route for the other.

Thank you.

View solution in original post


All Replies
L5 Sessionator

Hello,

Do you have static routes for both the ISP's or do you have a PBF configured for one of them.

Thank you.

Subijith Raghunandan.

Highlighted
L1 Bithead

They are simple static routes.  One has a higher metric pointing to the other VR.

Highlighted
L5 Sessionator

You might want to refer the following DOC:-

https://live.paloaltonetworks.com/docs/DOC-1357 wherein you configure a PBF for one ISP wherein you can have the tracking mechanism and a static route for the other.

Thank you.

View solution in original post

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!