02-28-2014 06:43 AM
If an expert could please take a look at a test DMZ zone I'm trying to configure on a PA-500 with OS 5.0.8 and tell me where I've gone wrong I'd appreciate it!
I realize it's wide open at the moment, but it's just for personal testing/understanding purposes.
Test NAT (should be irrelevant for this internal test):
CLI Policy Test (Source = My workstation IP):
Ping Test from my Internal (Trust) workstation to a statically set Windows 7 box connected to the DMZ-Test zone:
Ping Test from DMZ-Test box to Internet:
03-02-2014 09:44 AM
What virtual router is the trust interface in?
I suspect your trust interface is in another VR that does not have the route to the Holland vr.
03-02-2014 02:53 PM
I ultimately figured out that I was having an asynchronous traffic issue.
Intra-VLAN routing was taking the internal traffic directly to the DMZ VLAN, and on the return trip it was coming through the firewall, which resulted in some bizarre behavior and had a few engineers scratching their heads for a minute. Shutting down the VLAN routing solved the problem.
Thanks for the reply anyway!
03-02-2014 03:58 PM
Yes, asymmetrical routing will cause all kinds of headaches. Glad you have it worked out.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!