Enhanced Security Measures in Place:   To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.

Unable to Ping Public interface ip from LAN network

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Unable to Ping Public interface ip from LAN network

L4 Transporter

Hi,

 

I am unable to ping my firewall interface public ip from my lan network. Already management profile has been attached in the interface. But still unable to ping the interface.

Snow
1 accepted solution

Accepted Solutions

Hi,

 

Please follow the given kb article to resolve your issue

 

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000Cm0ICAS

 

Regards

Basavaraj

View solution in original post

7 REPLIES 7

L1 Bithead

And what do your traffic logs show you?

L4 Transporter

There is no entry in the traffic logs, I can see some NAT Land drop counters increasing. 

Snow

L1 Bithead

L4 Transporter

Hi @KenVaBr ,

 

This is not the scenario, Actually we are tried to ping Wan Interface IP of the firewall from the LAN network, But it is not pinging.  

Snow

Hi,

 

Please follow the given kb article to resolve your issue

 

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000Cm0ICAS

 

Regards

Basavaraj

L1 Bithead

Hi @Cooper69  Are you a colleague of @SubaMuthuram ? Like myself and @Basavaraj said: it's probably something to do with your source NAT'ing setup. 

So if you're a colleague of him: have you tried one of the 2 suggested changes?

If you're not a colleague of him: please give us more information about your setup. Because now we know nothing about the nature of your issues.(and you should probably make a different topic as well then)

Hi Basavaraj,

 

Thanks for the Solution.

Snow
  • 1 accepted solution
  • 5100 Views
  • 7 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!