Validation failed when committing a changes to managed firewalls from Panorama

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.
Palo Alto Networks Approved
Palo Alto Networks Approved
Community Expert Verified
Community Expert Verified

Validation failed when committing a changes to managed firewalls from Panorama

L2 Linker

Last week we made a changes(added new IP addresses as a Source) to the existing security policy and tried verifying by validating template/device group for target firewalls however it results in validation failed with following errors.

 

 

user-id-agent unexpected here

Vsys is invalid

Device is invalid

Configuration is invalid

 

Any help and suggestions are highly appreciated.

3 REPLIES 3

Hi @Kathiravan_R ,

Such error are usually observed after PanOS upgrade, when config is not preperly migrated to the format for the new version.

Have you done any upgrade recently? Either for the FW or for the Panorama?

L2 Linker

Hi @aleksandar.astardzhiev 

Yes you are correct, there was a PAN OS 10.1.5-h1 upgrade performed for Panorama few days ago.

May I know how to mitigate this issue? will OS downgrading solve this issue ? Please advise.

Community Team Member

Hi @Kathiravan_R ,

 

Try going into the individual components that have failed and re-entering them/clicking ok on them. 

 

Check out this discussion where other users had the same issue. If the issue still persists take a look at the 2nd comment in the discussion.

 

NGFW 

LIVEcommunity team member
Stay Secure,
Jay
Don't forget to Like items if a post is helpful to you!

Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.
  • 3331 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!