We are having a warning when we push in panorama:
We have check the apps&threats version and everything is OK. Panorama version is 9.0.4. It could be a cosmetic issue?
Solved! Go to Solution.
http2 is a new protocol decoder in the 9.0.x version of the PANOS.
Is this message seen on the Panorama, or on a FW that receives its config from the Panorama.
If you go under your AntiVirus Profile, how many protocol decoders do you see?
I can confirm Panorama 9.0.5 push to 8.1.12 (pa5060) still has this warning. Will 9.0.6 resolve this (if/when released)? Does 9.1.0 resolve this?
Any one from Palo Alto wish to comment?
As soon as you upgrade the firewall to 9.0.x or downgrade panorama to 8.1.x the warning will disappear.
If you only upgrade panorama to 9.0.6 or even 9.1.0 but the firewall stays on 8.1.x this won't change anything.
Thanks for the quick response. So Panorama 9.x does not fully support 8.1.x firewalls? If it does, then it should be smart enough to know that a 8.1.x firewall doesn't support http/2 and not produce a red warning message. PA5060s cannot run 9.x
If one is using Panorama to manage several firewalls (which is by design), and most are at 9.x but a couple have to stay at 8.1.x (ex. PA5060), then having Panorama at 9.x would make sense for the majority of the other firewalls. I feel this is a UI defect as a warning shouldn't be produced when pushing from 9.x Panorama to 8.1.x PAN OS firewall(s).
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!