http2 is a new protocol decoder in the 9.0.x version of the PANOS.
Is this message seen on the Panorama, or on a FW that receives its config from the Panorama.
If you go under your AntiVirus Profile, how many protocol decoders do you see?
Thanks for the quick response. So Panorama 9.x does not fully support 8.1.x firewalls? If it does, then it should be smart enough to know that a 8.1.x firewall doesn't support http/2 and not produce a red warning message. PA5060s cannot run 9.x
If one is using Panorama to manage several firewalls (which is by design), and most are at 9.x but a couple have to stay at 8.1.x (ex. PA5060), then having Panorama at 9.x would make sense for the majority of the other firewalls. I feel this is a UI defect as a warning shouldn't be produced when pushing from 9.x Panorama to 8.1.x PAN OS firewall(s).
Ok, last try until I give up 😛
Did this warning start right then when you upgraded your panorama to 9.0.x? What about deleting the action in that profile (via cli on panorama), did you try this? The goal is to have a profile where maybe the http2 is shown in the web UI but not actually in the config that is applied to the firewall.
PS: I am with you that panorama should detect that as this warnkng is totally useless in this situation.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!