- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
09-13-2021 04:18 AM
Hi Team,
I am using PA-3220 . We have only Thread Prevention & Wildfire License. Before Anti-Spyware -DNS Signature was using DNS-Snikhole.
Now we change to block we start getting Warning No Vaild DNS Security License . Do we had to buy a license as it is working?
09-13-2021 08:20 AM
Hi @NavidAlam ,
The warning indicates you have a policy configured with no license to support it. Setting the actions to allow in the DNS Polices tab of your Anti-Spyware profile will remove the error. You cannot modify the default profiles. If you are using one, you will need to create a custom profile and use it in your security policy instead of the default.
Regards,
Tom
09-13-2021 08:42 AM
Here is a shot from 9.1. The Packet Capture must be set to disable also.
09-13-2021 08:20 AM
Hi @NavidAlam ,
The warning indicates you have a policy configured with no license to support it. Setting the actions to allow in the DNS Polices tab of your Anti-Spyware profile will remove the error. You cannot modify the default profiles. If you are using one, you will need to create a custom profile and use it in your security policy instead of the default.
Regards,
Tom
09-13-2021 08:30 AM
Hi Tom,
We are using 9.1.11 The snapshot you show it is not coming on 9.1.11 ?
09-13-2021 08:42 AM
Here is a shot from 9.1. The Packet Capture must be set to disable also.
08-19-2022 05:18 PM
None of these suggestions worked for me, setting all to Allow or Default, did not remove the No Valid DNS Security License. I was able to remove the warning by deleting all botnet-domains from Spyware profile in cli. More details here https://live.paloaltonetworks.com/t5/general-topics/no-valid-dns-security-license-resolved/td-p/5124...
02-17-2023 02:49 PM
On newer versions (I'm assuming 10.0.0 and newer), in addition to changing the POLICY ACTION to allow and PACKET CAPTURE to disable, you need to change the LOG SEVERITY to none. I hope this helps someone. (This worked successfully on PAN-OS 10.2.2 & 10.2.3-h2)
09-26-2023 01:25 PM
This did help someone...me! Thanks.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!