- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
08-21-2021 03:32 PM
Fresh install of a VM-Series, 9.0.11. I didn't manually allocate RAM, so it was running with 5.6G when I activated - get the message, increase RAM then activate again. Shutdown, increase RAM to 10GB. Boot - firewall is now in a weird state where all the licenses are present except capacity, and it shows serial number as unknown.
Should I start again or just try to release the license and re-activate?
08-21-2021 09:04 PM
I would simply try to release the license and re-activate and see if that fixes things and gets the capacity licensing corrected. Depending on activation state you'll need to clear the license and de-activate it to reclaim it anyways if you don't already end up having to open a TAC support case to have it released on the backend.
08-23-2021 07:27 PM
Thanks. It wouldn't release what license it had, so I created another one - which activated just fine, so the activation wasn't complete on the portal end either...
08-24-2021 09:03 AM
Hello Simon..
What version of VM are you deploying? For example.. a VM100 needs 6.3GB of memory, but no more than 8.
If you deployed with a 10GB, then I presume you are trying to run a VM300 series.
Please confirm.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!