Enhanced Security Measures in Place:   To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.

Wildfire

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Wildfire

L1 Bithead

I was wondering ifsomeone could help with clarifying how the WildFire– Proof Point integration works.

A client of ours has Palo Alto NGFW in more geographically distant locations, and they also have Proof Point integrated with Wild Fire.

[1] How and with whom does Proof Point communicate and where is his position in the network?

[2] In regard to the Wild Fire licence, does it have to be on all of the Palo Alto NGFW active in order for Proof Point to work?

[3] Does Proof Point work regardless on which location the licence for WildFire is installed?

 

Thank you in advance,

2 accepted solutions

Accepted Solutions

Hi @Hammer88 

 

There ia no direct integration betqwen something on the firewall and proofpoint. Actually I know only a little about proofpoint email gateway. There you need a wildfire API key. To get such a key you ned at least one active wildfire subscription. For this integration there is no communication between the firewall and proofpoint required as proofpoint uploads the attachments to wildfire. If wildfire sees this as malware a signature is created which the firewall downloada directly from paloalto update servers. 

View solution in original post

Cyber Elite
Cyber Elite

Hello,

Here are some replies to your questions:

 

1. if you setup Proofpoint with the Wildfire API, it would be Proofpoint that sends the request to the wildfire cloud, not your PAN's

 

2. No. however the PAN's that do not have the license will not get the new signatures as quickly as the ones that do have it. 5-10 minutes with a license, 1+day without license.

 

3. Yes, Proofpoint sends the requests to the Wildfire cloud via an API. It does not matter where the PAN with the license is located.

 

Hope that helps.

View solution in original post

6 REPLIES 6

L7 Applicator

Hi @Hammer88 

 

It depends on the proofpoint product that you have. Actually you need at least one firewall with a wildfire subscription as you need the wildfire API key. But depending on the protection you requires you need a wildfire subscription for more/all your firewalls ... this depends on your current topology and security requirements.

Hi @Remo ,


So would you say that the Proof Point , in general, would do the analysis only on the locations where the WildFire licence is active? Can it be done on Firewalls where there is no active WildFire licence?

 

Hi @Hammer88 

 

There ia no direct integration betqwen something on the firewall and proofpoint. Actually I know only a little about proofpoint email gateway. There you need a wildfire API key. To get such a key you ned at least one active wildfire subscription. For this integration there is no communication between the firewall and proofpoint required as proofpoint uploads the attachments to wildfire. If wildfire sees this as malware a signature is created which the firewall downloada directly from paloalto update servers. 

Cyber Elite
Cyber Elite

Hello,

Here are some replies to your questions:

 

1. if you setup Proofpoint with the Wildfire API, it would be Proofpoint that sends the request to the wildfire cloud, not your PAN's

 

2. No. however the PAN's that do not have the license will not get the new signatures as quickly as the ones that do have it. 5-10 minutes with a license, 1+day without license.

 

3. Yes, Proofpoint sends the requests to the Wildfire cloud via an API. It does not matter where the PAN with the license is located.

 

Hope that helps.

L1 Bithead

Thanks to all very much.

 

Regards,

Dear Team,

 

I am Looking for Wildfire Initial Configuration for 500 Physical Appliance through cli. Please share if any body have.

 

Best Regards,

A.yazar

Yazar Arafath
  • 2 accepted solutions
  • 6480 Views
  • 6 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!