Enhanced Security Measures in Place:   To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.

GlobalProtect v5.2.4 client disconnects with "Received a virtual interface packet with fragment"

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

GlobalProtect v5.2.4 client disconnects with "Received a virtual interface packet with fragment"

L1 Bithead

I am running GlobalProtect client 5.2.4-21, experiencing frequent disconnect events accompanied in PanGPS.log by the following:

 

(T10852)Debug(1564): 01/11/21 17:33:00:578 Received a virtual interface packet with fragment 0x2000
(T10852)Debug(1564): 01/11/21 17:33:00:578 Received a virtual interface packet with fragment 0xAC
(T10852)Debug(1564): 01/11/21 17:33:01:779 Received a virtual interface packet with fragment 0x2000
(T10852)Debug(1564): 01/11/21 17:33:01:779 Received a virtual interface packet with fragment 0xAC
(T10852)Debug(1564): 01/11/21 17:33:01:894 Received a virtual interface packet with fragment 0x2000

...

 

These lines keep repeating until the connection restores itself. During the disconnection event, the GlobalProtect client remains "connected" to the network, it's just that no traffic seems to make it back -- all connectivity appears to be lost from the user's perspective. It usually takes 30-90 seconds for the normal connectivity to resume. These events typically happen 2-3 times an hour during the work day. 

 

Does anyone have an idea what might be causing this? 

 

1 accepted solution

Accepted Solutions

It appears that getting a different modem and router fixed the problem... Customer support still doesn't know what caused the issue and they are not interested in investigating further as far as I can tell... The equipment I had before (a 2017 Arris Surfboard Gateway) worked fine except when running GlobalProtect. If you are having this problem, please contact customer support and make sure they are aware that this issue wasn't isolated to one customer. "Buy a new modem/router" should not be considered a sufficient long-term solution.

View solution in original post

5 REPLIES 5

Cyber Elite
Cyber Elite

We are experiencing the error message with 5.2.4.   We are going to try the latest 5.2.5 to see if this resolves, else, we are going to downgrade to a 5.1.x version.  Recommend you do the same, do some testing, and let us all know.

 

You can also try to Collect Logs and open a ticket with TAC.

 

Changes were made in 5.2.x to allow IP fragmentation, but I think this is breaking something.

Help the community: Like helpful comments and mark solutions

Hello @millerh1 

Is this problem happening on some specific endpoint? (Dell, Lenovo, Apple, etc.)
Do you checked the Ethernet/Wireless Driver version?

We are having similar problems and would like to look for common ground.

Thanks.

Hi @S.Cantwell thank you for the reply! We have no opened a ticket with support and I will be sure to let you know what they say. If nothing else, I'll try downgrading to 5.1.5 and see if that helps!

 

Hi @henrique.correia -- The drivers are up to date on the client machine (Acer laptop). 

 

I switched to a different network that has a static IP address and no router (modem only). It seems to be performing fine on this new setup -- but it's not clear why that would make a difference. The original router is a 2017 model Arris Surfboard and I don't see any issues with normal internet connectivity -- the issue starts only when I am connected to GlobalProtect. 

It appears that getting a different modem and router fixed the problem... Customer support still doesn't know what caused the issue and they are not interested in investigating further as far as I can tell... The equipment I had before (a 2017 Arris Surfboard Gateway) worked fine except when running GlobalProtect. If you are having this problem, please contact customer support and make sure they are aware that this issue wasn't isolated to one customer. "Buy a new modem/router" should not be considered a sufficient long-term solution.

  • 1 accepted solution
  • 5090 Views
  • 5 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!