Delay PSMP services on start-up

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
PAM Self-Hosted Articles
1 min read
L0 Member
No ratings
In some cases, customers face issues when restarting the PSMP machine to successfully start the PSMP services on boot.

Steps

The workaround to this issue is to delay the PSMP services from starting up on boot-up in order to bring all services which are server-dependent to start and then to allow the PSMP services to successfully start, as this delay will avoid conflicts for the PSMP.

Add the following "ExecStartPre=/bin/sleep 30" to psmpsrv-psmpserver.service and psmpsrv-psmpadbserver.service.

You can then test this by restarting the PSMP machine.

Note:
This above process is for the newer RHEL8 PSMP installer, that uses
/usr/lib/systemd/system/psmpsrv-psmpserver.serviceand and not /etc/rc.d/init.d/psmpsrv
Rate this article:
  • 2058 Views
  • 0 comments
  • 0 Likes
Article Dashboard
Version history
Last Updated:
‎11-11-2021 05:22 AM
Updated by: