Traffic to panorama

[yurisilva]

Hello,
I had a panorama instance in my cloud
Yesterday i removed my ha pair from panorama.
I have followed all steps, disabled ha sync, disabled the panorama objects, templates and network, checked the box to copy these configuration to my firewalls, delete the panorama IP and etc.

But after doing all changes in my firewall and panorama, completely remove my firewalls from panorama, I still see traffic for the panorama IP and the 3978 port on my firewall.
I can't find where is the configuration setting that is generating this traffic.
Can someone help me with this issue? 

[PavelK]

Hello @yurisilva

thanks for post.

Could you please check whether there is in Firewall any configuration left related to log forwarding to Panorama under:

Device > Log Settings

Objects > Log Forwarding

Kind Regards

Pavel

[yurisilva]

Thanks for answer @PavelK !!!
Yes, i have a configuration in Objects > Log Forwarding, the IoT Security Default Profile with the forward method set for panorama, but this configuration setting is Read-only, i can't change or delete it.

Do you think that it is causing the traffic that i still see ?

Do you know how i can disable this configuration setting or the forward method ?

[PavelK]

Thank you for reply @yurisilva

Would it be possible to provide a screen shot of that IoT log forwarding setting?

Kind Regards

Pavel

[yurisilva]

Yes, i can @PavelK 

The only settings are these above.

[PavelK]

Hello @yurisilva

thank you for reply.

Your screenshot does not cover whole screen, however it looks like it is the IoT Security Default Profile. Could you click on down arrow and click on Global Find to see whether it is reference in anu configuration?

If it does not return anything, I do not think this is a root cause of traffic to Panorama. As a next steps, I would suggest to export running configuration and check whether there is any Panorama related configuration left. Also could you navigate to: Monitor > Session Browser and see whether there i still any session running to Panorama IP address. If there is any, try to kill it.

Kind Regards

Pavel

[yurisilva]

Thanks for help @PavelK 
Global find didn't return anything
I have exported the running configuration but i didn't find anything from panorama

I have tried kill the sessions, but after kill its, the sessions starts again.

[PavelK]

Hello @yurisilva

thank you for reply.

Could you check system logs from Monitor > Logs > System to see any traces where Panorama still comes to picture? For example you can use this filter: ( description contains 'Panorama' )

Kind Regards

Pavel