First of all, I am running PAN 3.1.3 on PA-2050 Here is my test procedure: Test 1. configure only SSL-VPN on untrust ethernet1 (IP:10.0.0.77, no 443 dest nat, no https management on this interface) type on brower https://mypan, SSL-VPN page will be opened. this is OK. Test 2. Configure Destination NAT on 443, keep SSL-VPN rule2 L3-Untrust L3-Untrust any any l3-untrustIP-10.0.0.77 service-https none dmzwebserver-192.168.100.100 : 8443 Result: I can access to dmzwebserver HTTPS server running on 8443 by typing https://10.0.0.77 in the browser. But I can't access to SSL-VPN on 4443. This is not OK Test 3. Disable SSP-VPN and enable HTTPS management on ethernet1, no change on dest NAT configuration. I can access to webserver and PAN management interface. This is also OK. Test 4: Enable SSL-VPN again (HTTPS management and dest NAT is already configured) I can access to webserver and PAN management interface. but can't access to SSL-VPN Test 5: Keep SSL-VPN and HTTPS management, disable dest NAT I can access to SSL-VPN and HTTPS management. As a result, If I enable dest NAT for port 443, I can't access to SSL-VPN. As I stated in my previous post, If you can provide an option to change SSL-VPN port, this problem will be solved. Thanks. Ismail YENIGUL PS: It will be great, if you can provide an option to disable SSL-VPN. At the moment, I have to delete SSL VPN settings to disable PS2: As far as I know, the following detail is not mentioned PAN documents. but it should be mentioned. "Assuming you had management enabled prior to configuring SSLVPN, management will move from port 443 to port 4443 when SSLVPN is configured on the same interface. SSLVPN will use port 443. Try connecting to port 4443 in your browser. e.g. https://externalIPaddress:4443"
... View more