04-28-2024 05:52 PM
Hello.
I want to proceed with failover TEST with HA configuration using PA-VM for AWS.
The subnet is Public.Private.HA, and you have configured two PA-VMs in Public.
Persistent problems occur, Ethernet1/1 HA port Ethernet1/2 Untrust port in the PA-VM's NETWORK -> Interface -> Ethernet entry
If you reboot the equipment after setting the Ethernet1/3 Trust port like this, the port status continues to go down (see picture below)
1. PA-VM HA Statu
2. PA-VM (PA-Primary)
3. AWS ENI Status
When configured for the first time, the port is in a normal port up state, but when you restart the next day after stopping the instance, the port is in a down state.
PA-Secondary equipment sometimes seems to reboot automatically. And the user password I set doesn't work.
Port is down even after disconnecting ENI from AWS and trying to connect and rebooting PA-VM.
I don't know what the problem is.
What should I check?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
