Scheduled Log Processing in Version 1.1.21

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
L5 Sessionator
100% helpful (1/1)

This document describes how to enable and configure the new feature in update version 1.1.20 to enable the scheduling of log processing for the Machine Learning feature.

Rate this article:
Comments
L2 Linker

It does not work. I don't see CPU spikes i usually see when log processing in progress.

Doesn't it have to have cron record or something ?

The schedule was sset to 10:05:00

Screen Shot 2019-05-28 at 10.36.42.jpgScreen Shot 2019-05-28 at 10.36.53.jpgScreen Shot 2019-05-28 at 10.51.17.jpg

 

L5 Sessionator

Can you update to ver 1.1.21 and test again. 

 

Also, how many log files are being processed? The best practice is to schedule the log processing during off hours.

L2 Linker

there were 5 files

we've successfully updated to 1.1.21

now we'll have to wait till tomorrow to have new file.

we'll let You know

 

L1 Bithead

upgraded to 1.1.21 and now I get a lot of odd issues and I get booted constantly.  When I first log in, the Dashboard reloads many many times before finally setteling down.  Then I go into one of my projects and click on say unused services.  It takes a bit while it does its query then i get a white page and eventually logged out.

L2 Linker

after night, new file generated, but schedule did not work.

we see log message, but 1 file is still not processed.Screen Shot 2019-05-29 at 10.16.14.jpg

Screen Shot 2019-05-29 at 10.19.09.jpg

L0 Member

I am gettting the same behaviour as IvanMoore. I get booted constantly as well and when I log in, the Dashboard reloads many many times before finally settling down. This happens across IE/Firefox/Chrome/Safari as well as Windows/Mac.

L5 Sessionator

i'm reviewing both the scheduled log export and teh UI refresh.

L5 Sessionator

for the UI refresh issues can you check the remaining space in your root partition:

 

From the CLI of your Expedition server issue the below command.

 

$df -a

 

Check the available space of the vg-root directory. This seems to be causing the issue if the disk is 80% or higher capacity.

 

expedition@Expedition:~$ df -a

Filesystem                      1K-blocks    Used Available Use% Mounted on

sysfs                                   0       0         0    - /sys

proc                                    0       0         0    - /proc

udev                              3002164       0   3002164   0% /dev

devpts                                  0       0         0    - /dev/pts

tmpfs                              604736    8400    596336   2% /run

/dev/mapper/Expedition--vg-root  18502968 6977800  10562200  40% /

securityfs                              0       0         0    - /sys/kernel/security

tmpfs                             3023672       0   3023672   0% /dev/shm

tmpfs                                5120       0      5120   0% /run/lock

tmpfs                             3023672       0   3023672   0% /sys/fs/cgroup

cgroup                                  0       0         0    - /sys/fs/cgroup/systemd

pstore                                  0       0         0    - /sys/fs/pstore

cgroup                                  0       0         0    - /sys/fs/cgroup/blkio

cgroup                                  0       0         0    - /sys/fs/cgroup/cpu,cpuacct

cgroup                                  0       0         0    - /sys/fs/cgroup/devices

cgroup                                  0       0         0    - /sys/fs/cgroup/freezer

cgroup                                  0       0         0    - /sys/fs/cgroup/memory

cgroup                                  0       0         0    - /sys/fs/cgroup/net_cls,net_prio

cgroup                                  0       0         0    - /sys/fs/cgroup/perf_event

cgroup                                  0       0         0    - /sys/fs/cgroup/cpuset

cgroup                                  0       0         0    - /sys/fs/cgroup/pids

cgroup                                  0       0         0    - /sys/fs/cgroup/hugetlb

mqueue                                  0       0         0    - /dev/mqueue

hugetlbfs                               0       0         0    - /dev/hugepages

systemd-1                               0       0         0    - /proc/sys/fs/binfmt_misc

debugfs                                 0       0         0    - /sys/kernel/debug

fusectl                                 0       0         0    - /sys/fs/fuse/connections

/dev/sda1                          482922  111167    346821  25% /boot

lxcfs                                   0       0         0    - /var/lib/lxcfs

tmpfs                              604736       0    604736   0% /run/user/1000

L2 Linker

I've succeeded by checking the box "AutoProcess CSV log files".

I think guide forgot to mention this.

Screen Shot 2019-05-31 at 07.46.37.jpgScreen Shot 2019-05-31 at 07.47.58.jpg

L0 Member

For the UI refresh issue, I have plenty of disk space available... It didn't happen on v1.1.19, I only saw it in v1.1.21. But in v1.1.23 it seems to be no longer an issue, so I am happy again.

 

sysfs 0 0 0 - /sys
proc 0 0 0 - /proc
udev 750684 0 750684 0% /dev
devpts 0 0 0 - /dev/pts
tmpfs 154440 4720 149720 4% /run
/dev/mapper/Expedition--vg-root 18502968 5114168 12425832 30% /
securityfs 0 0 0 - /sys/kernel/security
tmpfs 772192 0 772192 0% /dev/shm
tmpfs 5120 0 5120 0% /run/lock
tmpfs 772192 0 772192 0% /sys/fs/cgroup
cgroup 0 0 0 - /sys/fs/cgroup/systemd
pstore 0 0 0 - /sys/fs/pstore
cgroup 0 0 0 - /sys/fs/cgroup/net_cls,net_prio
cgroup 0 0 0 - /sys/fs/cgroup/cpuset
cgroup 0 0 0 - /sys/fs/cgroup/blkio
cgroup 0 0 0 - /sys/fs/cgroup/hugetlb
cgroup 0 0 0 - /sys/fs/cgroup/pids
cgroup 0 0 0 - /sys/fs/cgroup/devices
cgroup 0 0 0 - /sys/fs/cgroup/memory
cgroup 0 0 0 - /sys/fs/cgroup/perf_event
cgroup 0 0 0 - /sys/fs/cgroup/cpu,cpuacct
cgroup 0 0 0 - /sys/fs/cgroup/freezer
systemd-1 0 0 0 - /proc/sys/fs/binfmt_misc
hugetlbfs 0 0 0 - /dev/hugepages
debugfs 0 0 0 - /sys/kernel/debug
mqueue 0 0 0 - /dev/mqueue
fusectl 0 0 0 - /sys/fs/fuse/connections
/dev/sda1 482922 160650 297338 36% /boot
lxcfs 0 0 0 - /var/lib/lxcfs
tmpfs 154440 0 154440 0% /run/user/1000

  • 24133 Views
  • 10 comments
  • 1 Likes
Register or Sign-in
Contributors
Article Dashboard
Version history
Last Updated:
‎10-07-2019 08:43 AM
Updated by:
Retired Member