- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
07-11-2019 12:55 AM
Hi!
Running Expedition 1.1.28.
I recently begun importing tunnels via CSV import. I have discovered that interfaces with type (media) "tunnel" are ignored if they are not assigned an address at all. Tunnel interfaces often don't need addresses asigned, especially if they are used with static routing and next-hop is the interface.
Performing an experiment with an ortdinary ethernet interface shows the same thing, without an address ethernet interfaces are not imported either. This is more understandable, as this could be en error in the CSV file.
Request: Please allow importing interfaces without IP addresses, at least for those media types where it makes sense.
/Per
07-11-2019 01:22 AM
Workaround: Set a dummy address, then it will be accepted. The address can be removed later.
/Per
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!