- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
08-09-2024 12:13 AM
Hi Team,
I have a requirement to setup 2 ISPs terminating directly on firewall.
1 as Active and the other as Standby. We will be using Static routing with higher metric value for the Secondary ISP.
If Primary goes down then Secondary should still allow access.
But i have a concern if i can create 2 NAT rules with same source and destination as Internet hide behind Gateway?
If the primary ISP is down will it take the next NAT rule for the Secondary ISP? If not may i know what is the best way to achieve?
Is there IP SLA config we can do on Palo?
Or do i need to configure 2 Zones and isolate the NAT rule?
Regards,
Sanjay S
08-09-2024 02:21 AM
You don't need to configure different security zone for your ISP's.
You need to configure 2 source NAT rules with different Destination Interface but the same Destination Zone.
Please see a guide here:
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000PLL8CAO
08-09-2024 02:21 AM
You don't need to configure different security zone for your ISP's.
You need to configure 2 source NAT rules with different Destination Interface but the same Destination Zone.
Please see a guide here:
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000PLL8CAO
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!