- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
03-16-2019 01:45 PM
Hi
I have some inserted routes into my BGP for redistribution.
firstly I have a NAT address associated with a loopback. I had a redis rule saying connected and added in the interface.
That didn't add the ip address into the BGP tables, tried just the /32 that didn't work either !
so I went into the router and bgp and redist rules an added in /32 prefix - that worked
now I went to change the orign attribute from incomplete to ibgp
firstly panoram didn't recognise that as a change ! I had to add in a new line << guessing thats a bug, just checked on the end PA and the rules are there with ibgp, so it just panorama that has the issue
secondly it still shows up on my bgp peers as a incomplete
Something wierd going on here ? more interested in the second bit why the prefix is being sent with incomplete instead of ibgp
03-16-2019 02:46 PM
Did you set the origin to IGP on the matching BGP export rule?
One thing I'll mention is that I had problems with BGP configurations in earlier PANOS versions. The GUI wouldn't match with the CLI output. You could make sure the necessary config is present in the CLI. But I think that was fixed in 7.1 so it shouldn't be a problem on 8.1.
03-16-2019 02:46 PM
Did you set the origin to IGP on the matching BGP export rule?
One thing I'll mention is that I had problems with BGP configurations in earlier PANOS versions. The GUI wouldn't match with the CLI output. You could make sure the necessary config is present in the CLI. But I think that was fixed in 7.1 so it shouldn't be a problem on 8.1.
03-16-2019 05:54 PM
No.. strange i would have thought it have flowed through, so there is no way to filter with out having 3 filters
so match for incomplete and then set incomplete etc etc..
03-18-2019 08:20 AM
Where did you set IGP before?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!