check all debugging enabled on firewall

[aggarwat]

I am wondering if there is any way we can check all the enabled debugging on Palo Alto firewall. 

[anon4all]

this is a a somewhat essential feature and lame that its not available. i understand what the OP wants. in cisco-land you can type "no debug all" to disable any trace of debug left by another user or to quickly kill all debugging. additionally, you can type "show debug" to see all levels of debug that are enabled. PAN firewall desperately needs this feature!

[SteveCantwell]

Oh, well if that is what they wanted, then they are simply needing this:

debug software logging-level show level service all-services

 and to bring the levels back to default

debug software logging-level set level default service all-services

[anon4all]

Thx for the tip!
If I turn on 2-3 debugs, can I turn them all off with the second command, without having to know which debugs are turned on?
Or does the turn off command:

debug software logging-level set level default service all-services
only work when every debug is turned on?

[SteveCantwell]

@anon4all   It was as you suggested... turn on whatever you want and the 2nd command will bring them all back to whatever the default settings are, without knowing which debugs are turned on.

[mhuddleston]

 For reference you can run the command below on firewalls.

>debug software logging-level show level service all-services

This will allow yo to see  "all-services" and the debug level currently turned on for them.

You can of course look at specific services by running 

>debug software logging-level show level service .....AND now hit TAB to get presented the services you can then choose.

To set all to default level run the following

> debug software logging-level set level default service all-services

This does not work on Panorama.