Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
02-12-2017 05:04 PM
Running a VM-300 on PANOS-7.0.3
When attempt to make a commit (either through GUI or CLI), it hangs at 98%, and then fails. The commit failure outputs the following:
Client sslvpn requesting last config in middle of commit/validate.
Aborting current commit/validate.
Not really sure where to start with this one, any advice is much appreciated.
Thanks.
02-13-2017 04:46 AM
Hi, @mmclimans,
Try following ms.log or devsrv.log during commit.
It could provide you more details on what could be wrong.
I've seen your error message in combination with 'ID population failed' (= corrupt ID manager). In that particular case a reset of the ID manager and a commit force fixed the issue. That being said, at this time there's not enough information to confirm if you are hitting this behaviour or something else.
Feel free to check out this blog which is a good starting point for troubleshooting commit failures.
Cheers !
-Kim.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
