Configure MAC based Security rule for SSL VPN User

cancel
Showing results for 
Search instead for 
Did you mean: 

Configure MAC based Security rule for SSL VPN User

L3 Networker

Hi Team,

 

Is it possible to create a security rule based on Source MAC Address instead of Source IP Address?
My requirement is, I want to create a rule for our SSL VPN users which is having our Company owned devices only connecting to our network.
Do you have any other ideas to achieve the above requirements?
 
Awaiting for your inputs !!
 
Best Regards,
Sahul Hameed
1 ACCEPTED SOLUTION

Accepted Solutions

Community Team Member

Hi @SahulH ,

 

MAC address filtering isn't currently possible.  You might want to check with your local SE.  There are several feature requests out for this and you might want to have your vote added to them.

 

As for an alternative, check out HIP.  Using HIP correctly ensures that the remote hosts accessing your resources are adequately maintained and adhere with the security standards before they are allowed access to your network resources.

 

https://docs.paloaltonetworks.com/globalprotect/9-0/globalprotect-admin/host-information/about-host-...

 

Hope this helps !

-Kiwi.

 

 

View solution in original post

1 REPLY 1

Community Team Member

Hi @SahulH ,

 

MAC address filtering isn't currently possible.  You might want to check with your local SE.  There are several feature requests out for this and you might want to have your vote added to them.

 

As for an alternative, check out HIP.  Using HIP correctly ensures that the remote hosts accessing your resources are adequately maintained and adhere with the security standards before they are allowed access to your network resources.

 

https://docs.paloaltonetworks.com/globalprotect/9-0/globalprotect-admin/host-information/about-host-...

 

Hope this helps !

-Kiwi.

 

 

View solution in original post

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!