- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
06-17-2013 09:00 PM
Did anyone encounter such issue?
We noticed that whenever the firewall triggered a failover (FW1 to FW2).
external services seem to be disrupted.
eg1 :Gomes monitoring informed of connection/performance issues (though we test from some countries to be ok)
eg 2: FTP services from various country reported connection problem (China, Taiwan)
But when we revert back to the FW from 2 to 1(Origin) all services return back to norm.
Please advice..
06-17-2013 11:44 PM
Link monitoring enable on the active ethernet interface.
Failure Condition : Any
06-18-2013 12:15 AM
ok it seams to be a routing issue.
for the monitoring try to use a path monitoring and see what append if you trigger a failover, normaly a revert to good appliance should be triggered automatiquely
if the comportement is like that you have to resolve your routing issue first.
06-18-2013 12:31 AM
Thanks..
FW1 work perfectly ok, issue only arise when failover to the FW2.
Both are running the same config/path/routes...
How would it be a routing issue?
06-18-2013 01:58 AM
are you in vwire config?
in that case have a look there https://live.paloaltonetworks.com/message/1628#1628
if you are in L3 config verify routing from your FW2 with path monitoring
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!