02-13-2018 07:11 AM
we maintain one PA security policy rule and give ip 192.168.0.11 to access server UTP01, the user is using ip 192.168.0.11, and he can't access the server, we can't find any security log for this. may i know how to debug this rule?
02-13-2018 07:46 AM
for me the quickest and easiest way (via GUI) is to edit the interzone-default rule at the bottom of your policies.
set the logging to session start.
you can then Monitor/Traffic and should see where the address 192.168.0.11 is trying to go to.
02-13-2018 07:52 AM
If you're not seeing any logs chances are the package is dropped before the security policy is evaluated (check the global counters).
Chances are also that the package isn't reaching the firewall even ... get PCAPS to make sure that the packages sent from the client are reaching the firewall interface.
Good luck !
-Kiwi.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
