Detect ipsec vpn tunnel down with remote palo alto peer

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

Detect ipsec vpn tunnel down with remote palo alto peer

L1 Bithead

 

 PA5020/PAN-OS 7.1.10

 

 I am trying to develop a NAGIOS check to get an alert , when a vpn tunnel between PA's at different locations

is down. So far I have been looking at the ifup-status of the corresponding tunnel interface at the local firewall. It turns

out that  this is still up , even if the vpn tunnel is down. From the local firewall, this can be argumentable and I can except. 
Are there any other SNMP variables in the Palo Alto SNMP MIBS to check and use in order to verify the status of a vpn tunnel

between 2 PA's ?

4 REPLIES 4

Have you seend this - https://live.paloaltonetworks.com/t5/Management-Articles/How-to-get-notifications-about-IPSec-tunnel...

 

Not completely sure if it the absense of SNMP OIDs is still valid for current versions.

 

   Tx, for the link, does anyone know of progress on ipsec link monitoring via SNMP in PANOS 8.x ?

 

M.

Community Team Member

Hi @marce1000,

 

Using a MIB-browser I found the following inside the PAN-TRAPS MIB :

 

panVPNTunnelStatusUpTrap : .1.3.6.1.4.1.25461.2.1.3.2.0.1746

panVPNTunnelStatusDownTrap : .1.3.6.1.4.1.25461.2.1.3.2.0.1747

 

2017-10-24_10-00-58.jpg

 

 

 

There's also a workaround using syslog messages :

 

Monitoring-VPN-tunnel-down-events-with-SNMP

How-to-get-notifications-about-IPSec-tunnel-status

 

Hope this helps !

-Kiwi.

LIVEcommunity team member, CISSP
Cheers,
Kiwi
Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.

Hi 

I have tested the MIBs and I have no feedback.
Have you if since Palo Alto has brought a solution to the problem?

  • 5896 Views
  • 4 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!