I am trying to develop a NAGIOS check to get an alert , when a vpn tunnel between PA's at different locations
is down. So far I have been looking at the ifup-status of the corresponding tunnel interface at the local firewall. It turns
out that this is still up , even if the vpn tunnel is down. From the local firewall, this can be argumentable and I can except.
Are there any other SNMP variables in the Palo Alto SNMP MIBS to check and use in order to verify the status of a vpn tunnel
between 2 PA's ?
Not completely sure if it the absense of SNMP OIDs is still valid for current versions.
Using a MIB-browser I found the following inside the PAN-TRAPS MIB :
panVPNTunnelStatusUpTrap : .188.8.131.52.4.1.254184.108.40.206.2.0.1746
panVPNTunnelStatusDownTrap : .220.127.116.11.4.1.25418.104.22.168.2.0.1747
There's also a workaround using syslog messages :
Hope this helps !
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!