device template stack values staying in overide mode, shared template values not passing through on template stack

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

device template stack values staying in overide mode, shared template values not passing through on template stack

L2 Linker

hello,

anyone ever have this following issue.

on some of our template stacks the shared template values are not passing through to the template stack.

in the template stack some values come through from the device template but the shared template (which is delow in order the device template stack) values do not come through but only on some fields, other fields value do come through.  we have deleted any values in the stack, comitt, push, reset vlaues in the device template ...still no avail.  other stacks using the same shared template are working okay.

any help would be greatly appreciated.

panorama running 10.2.1

devices running 10.1.6

2 REPLIES 2

Community Team Member

Hi @miguelMA ,

 

I've seen scenarios where template stack settings were not pushed to the firewalls because the template stack was set to multi-vsys mode.

 

Could you possibly be running into this issue ?

 

Please check the following KB if that's the case: https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000PLkcCAG

 

Best,

-Kiwi.

 
LIVEcommunity team member, CISSP
Cheers,
Kiwi
Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.

L2 Linker

Hey kiwi, 

with a joy of finally a solution/something to try! (it's been over a week and nothing from palo support).

Alas all the template and device are set to single vsys mode.

😞

but thanks for the hope!

 

  • 1297 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!