DMZ Web Server Access Setup

[cpatte7372]

Hello Community,

I have set up a lab environment shown in the below below that is meant to allow access from 192.168.1.X to the sever 10.2.2.1 using static NAT ip address 192.168.1.251

I have configured everything as demonstrated in the CBT Nugget see below for the NAT and Security Policies

However, the policy wont

[santonic]

Also check if service is listening on port 80 or if there is some local fw on server.

[Ozamir]

Hey,

So, from the logs you can see that "bytes recieved" is "0",

You can also see that NAT is taking place,

Means L2 or L3 issue.

Try and check the arp tables on both the PC and NGFW.

[cpatte7372]

Ozamir,

Thanks for responding. 

Can you direct me to samples of DMZ access to webserver from the Internet?

Regards