05-15-2016 06:53 AM
I have set up a lab environment shown in the below below that is meant to allow access from 192.168.1.X to the sever 10.2.2.1 using static NAT ip address 192.168.1.251
I have configured everything as demonstrated in the CBT Nugget see below for the NAT and Security Policies
However, the policy wont
05-15-2016 11:39 PM
Also check if service is listening on port 80 or if there is some local fw on server.
05-16-2016 01:04 AM
So, from the logs you can see that "bytes recieved" is "0",
You can also see that NAT is taking place,
Means L2 or L3 issue.
Try and check the arp tables on both the PC and NGFW.
05-16-2016 03:51 AM
Thanks for responding.
Can you direct me to samples of DMZ access to webserver from the Internet?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!