Get FQDN table using XML-API?

[Npiacentine]

Does anyone know if it's possible to get the current FQDN table (CLI> request system fqdn show) using the XML-API?  We recently had an issue where a bad FQDN mapping was retrieved and I want to set up monitoring to catch it if it happens again.

[panos · Accepted solution]

/api/?type=op&cmd=<request><system><fqdn><show></show></fqdn></system></request>

You can use that.Don't forget to add key into this.

[VinceM]

Hi

To know if it's possible, the good method is to connect on your palo with at the end /api. THen you will see all command which can be called by API.

And it seem for you it is with something like: /api/?type=op&cmd=<request><system><fqdn><show></show></fqdn></system></request>

don't forget authentication.

V.

[VinceM]

take to many time to type my answer 🙂

[panos]

upwards is the first

[Npiacentine]

I got it to work, but only with the "admin" user.  My "readonly" user (role "Superuser (read-only), Administer/View: (Everything)) gets access denied.  Is there any way to grant access to my readonly user?  ...I'd rather not use the admin user's key if possible.