10-05-2021 10:47 AM - edited 10-05-2021 11:27 AM
Hello
I am struggling to get some very basic data from a Palo Alto Firewall or Panorama appliance. All answers seem to point to third party solutions.
I would like to get historical bandwidth usage. Pretty much what QoS Statics offers but instead of realtime, I want to be able go back days/weeks. All I am getting is aggregated data by Application over a period of time which doesn't answer my question since I want to be able to identify the highest spikes in overall traffic by Mbps.
10-05-2021 02:24 PM
Hello,
Unfortunately, 3rd party solutions is the way to go. There are some that are free for a small numbers of things monitored. PRTG is one that I have used in the past, each thig you monitor is a 'sensor', so say a firewall and you monitor 5 interfaces including cpu/ram, this will be 7 sensors. I think its free up to 100 sensors.
While I'm not endorsing a specific product, just using one as an example. Check your regulations/policies to see which one fits and can be used.
Regards,
10-05-2021 02:24 PM
Hello,
Unfortunately, 3rd party solutions is the way to go. There are some that are free for a small numbers of things monitored. PRTG is one that I have used in the past, each thig you monitor is a 'sensor', so say a firewall and you monitor 5 interfaces including cpu/ram, this will be 7 sensors. I think its free up to 100 sensors.
While I'm not endorsing a specific product, just using one as an example. Check your regulations/policies to see which one fits and can be used.
Regards,
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
