04-23-2024 01:57 AM
Hi,
my PA220 interfaces were down due to internet connection is down. As the internet connection was up, the interfaces also showing UP. Why is this happening. is there any settings for this to check.
04-23-2024 04:10 AM
Hi @mdaliasif_1210 ,
I believe the following KB can help you troubleshoot your link down issue:
How to troubleshoot physical port flap or link down issue
Kind regards,
-Kim.
04-25-2024 09:43 AM
Are you saying that all of your interfaces on the PA-220 were offline when the ISP connection went down, or was it just your untrust interface that went down with the ISP connection?
If there was an issue with your ISP connection the untrust (or whatever you use as an internet zone) interface going down might make sense depending on the nature of the ISP issue, but loosing the other interfaces at the same time doesn't make sense. Are you sure it was an ISP issue and not an issue with the dataplane on your PA-220?
04-25-2024 09:57 AM
All the Intefaces were down. After some time when Internet connection i was UP, all the interfaces were start functioning.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
