IP Directed Broadcast

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

IP Directed Broadcast

L1 Bithead

Hello,

We want to use wake on LAN in a vlan attached to a layer3 interface on the firewall. The magic packets are sent from a server outside the vlan to the broadcast address. I allowed WOL-packets in the firewall policies, and I see them in the logs, but the computers don't start. Do we have to configure something else in the firewall to allow ip directed broadcasts like we have to do in our cisco L3-switches?

Thanks,

Stefan

3 REPLIES 3

L0 Member

Hi,

 

Same problem for me, did you fond the solution ?

 

Thanks,

 

Fabien

Don't think it is possible in Layer 3 mode:

 

IP.JPG

This solution allowed me to pass the WOL packets/ direct broadcast through the interfaces.

 

https://live.paloaltonetworks.com/t5/General-Topics/How-to-configure-WOL-forwarding-through-a-VPN-tu...

 

 

 

  • 12202 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!