Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
10-07-2013 05:47 AM
Hello,
We want to use wake on LAN in a vlan attached to a layer3 interface on the firewall. The magic packets are sent from a server outside the vlan to the broadcast address. I allowed WOL-packets in the firewall policies, and I see them in the logs, but the computers don't start. Do we have to configure something else in the firewall to allow ip directed broadcasts like we have to do in our cisco L3-switches?
Thanks,
Stefan
05-29-2017 01:02 PM
Don't think it is possible in Layer 3 mode:
04-04-2019 12:53 PM
This solution allowed me to pass the WOL packets/ direct broadcast through the interfaces.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
