I woulld like to understand the advanced IPSEC gateway configuration.
between to ike gateway on with a static ip address and the other with a dynamic ip allocated.
to established the phase 1, i need to set the aggressive mode on both firewall or only on the one with dynamic ip allocated?
and when I need to activate the enable passive mode?
Solved! Go to Solution.
- You don't need to enable this for VPN with dynamic IPS.
- This is handy for troubleshooting VPNs, since only the receiving side has advanced logs which can indicate the problem (the initiator will mostly only see "timeout"). So if you enable this you will always be the receiving side and thus have more logging...
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!
The Live Community thanks you for your participation!