03-02-2023 12:03 AM
Hi,
Is it possible to configure a PA-3220 firewall to work as NTP server for my internal network devices?
In this scenario the firewall would synchronize with an external source and would be used by the internal devices as a NTP server.
Thanks!
03-02-2023 04:55 AM - edited 03-02-2023 04:56 AM
Hi @Borala ,
No, the NGFW cannot be used as an NTP server. There is no configuration for it, only NTP client. I use the same design as you, and I use a router as the internal NTP server.
Thanks,
Tom
03-02-2023 04:55 AM - edited 03-02-2023 04:56 AM
Hi @Borala ,
No, the NGFW cannot be used as an NTP server. There is no configuration for it, only NTP client. I use the same design as you, and I use a router as the internal NTP server.
Thanks,
Tom
03-06-2023 02:38 AM
Hi @Borala ,
While it's currently not supported, there is an existing feature request for it.
Please reach out to your local SE and have him add your vote to the existing request: FR1197 (NTP server - allow PAN device to be an NTP time source ).
Kind regards,
-Kiwi.
11-22-2023 04:17 AM - edited 11-22-2023 06:41 AM
I ve created a feature request for this.
LINK to the feature request
Please vote it up 😉
(not this post here. the post when you follow the link)
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
