one trust two untrust

Showing results for 
Show  only  | Search instead for 
Did you mean: 

one trust two untrust

L0 Member

If I have two DSL connections, and 10 network segments, is possible configure on a PAN firewall one "trust" zone, tow "untrust" zone and send five segments for each one?


L4 Transporter

The PA firewall does not do load balance. You can do a redundant link setup. You can use PBF for that.

Configuring Policy Based Forwarding (PBF)


Syed R Hasnain

L4 Transporter

L7 Applicator

Hello Simon,

From your post , it's looking like you want a setup like below mentioned diagram.


Then, please follow the above document mentioned by Shasnain.

Note: make sure there are no asymmetric-routing happening between 2 ISP links.

Hope this helps.


  • 3 replies
  • 101 Subscriptions
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!